Commented on a post

Ahhh the shafts were cut down for a short lady, ok I will have to find an orange dot iron.

March 19, 2021 2
Asked a question
Butt trim for orange dot into ping zing irons

I want to put graphite shafts into a set of ping zing2 irons, how long would the shaft be from the end of the hosel to the end of the butt of the 6 iron? Assuming I add or subtract half an inch from that...

March 19, 2021 2
Commented on a post

Hi Britt, I don't understand it BUT after playing with the Nickent 7DX steel shaft irons for 6-7 weeks the rust marks have gone!!!!! Unbelievable but true, was I dreaming I don't know except I'm embarrassed...

March 19, 2021 2
Asked a question
DVS graphite shaft v uniflex steel shafts

I'm using Nickent 7DX irons with uniflex steel shafts, I hit them good and sometimes very good. But the 4-5 inches near the iron head is slightly chipped and has some signs of rust, I'm looking for replacement...

March 12, 2021 2
Commented on a post

Ahh maybe that’s it, anyway I’ve sold it for what I paid 2 years ago so I’m ok. Put it down to experience and try something else later, will use the r7 ping i20 until I feel like trying something...

December 17, 2020 2
Asked a question
R7 better M3

Why do I hit the r7 better than the m3,12 years difference in technology so in theory the m3 should perform better in all respects but it doesn't. I've used the same purple ice stiff graphite shaft...

December 16, 2020 2
Asked a question
Nickent 7DX iron heads

I bought these with the thought that the 7DX heads would be better than the 3DX? They came with uniflex steel shafts and I hit them 20 meters shorter than the 3DX hybrids with sr2 graphite shafts, would...

November 14, 2020 2
Asked a question
Taylormade R7 verses M3?

I've been using and M3 with a reg and stiff graphite shafts, I really can't hit the m3 with any consistency. It's left right and rarely on the fairway, very frustrating BUT" I bought a R7 8.5 degree driver...

November 6, 2020 2
Commented on a post

Appreciated your kind words Britt, been looking for some used club making gear that I can't afford new. In NZ I've not seen any online guessing not many club fitters here mostly sell new clubs and lessons...

November 5, 2020 2
Asked a question
Built some irons

My brother is 76 and struggling with his taylormade r7 irons, the iron heads are good but the shafts too strong for him to control. I bought a set of used Srixon I-601 4-sw to try and make a set he could...

November 3, 2020 2
Commented on a post

Maybe the water in New Zealand is better LOL, it worked for me...

November 1, 2020 2
Commented on a post

Can dents be recovered like a dent on a car panel with boiling water?

October 30, 2020 2
Commented on a post

Golfsmith Hicor plus 15-3-3-3 Titanium 400cc, Forged face beta titanium. The shaft looks like it’s bent inside the head but maybe that’s the design? Really appreciate your help Britt.

October 30, 2020 2
Commented on a post

Also got a Golfsmith driver that's been cut on the top of the head, senseless in my mind...

October 29, 2020 2
Asked a question
Cinesis Dualt 10.5 driver

Found in the trash, been damaged with a hammer for why I've no idea. Wondering if you can give me your view on it please...

October 29, 2020 2
Commented on a post

Sorry I've tried but can't attach a photo, thanks anyway...

August 4, 2020 2
Commented on a post

I really appreciate your help Britt, I will take photos and need to learn how to attach photos lol... Cheers Colin

August 3, 2020 2
Commented on a post

My humble apologies but I got was wrong, the scales were faulty. I checked the heads weight on a friends scales and there's about 8 grams difference, I've now bought new scales....

July 31, 2020 2
Asked a question
Top Flight Ultimate irons...

Anyone using these, would like your feedback please. I bought a set 5 to SW, I wanted the graphite shafts to fit other irons I have but like the feel of them. Shafts are mid firm and I think an inch longer...

July 30, 2020 2