Posted an answer
New shafts

Moose. Here’s your trimming instructions for Recoil 780. From the manufacturers site. https://www.ustmamiya.com/golf-shafts/brands/recoil/recoil-760780-es-smacwrap-iron/

2 days ago 5
Posted an answer
New shafts

Welcome Moose.  Depending upon whether you are installing stiff, or regular shafts the tip trimming for Recoil shafts can be found here. https://www.golfworks.com/images/art/shaft_trim_inst.pdf You will...

2 days ago 5
Asked a question
Removing iron heads in cold weather

Canadian winters are legendary. I have my shop in an unheated garage with a temperature of -10 Celsius. I’d like to remove some KE4 forged heads, then assemble with new shafts in my warm basement. Since...

2 days ago 2
Posted an answer
Zelos or Neo

67 years here. TE forged.  Play the 950 gh, but tested the NEO in a 9 iron and got a nice high trajectory. haven't messed with the Zelos yet, but sounds like a perfect alternative to graphite. If you...

4 days ago 5
Posted an answer
Hogan Apex Shaft soft stepping

@solly.  Played a lot of Hogans for years. Apex 3 was definitely a standard regular. 4 was stiff. Good luck with the soft step if you chose to do so. -Bill

4 days ago 5
Commented on a post

Sorry on the pricing Britt. I was comparing the new NEO to the standard 950 GH. Nippon indicates the NEO is a higher launching shaft for modern heads with stronger lofts. Thanks for the detailed explanation....

4 days ago 2
Asked a question
Stronger loft question

This is for my game, and I’m not assembling for someone else. Let’s say 15 years ago I hit a 7 iron 155 yds. Today that would be around an 8 iron. I’m thinking the differences are around 1 1/2 clubs....

5 days ago 2
Posted an answer
Iron design for higher spin

@rosscw.   Highly recommend the TE’s. I can’t say enough about them. Thinner top line, lofts that I like. Sometimes I can’t get used to the higher lofts, so I always look for Maltby forged models...

5 days ago 5
Commented on a post

Soooo the adaptors DO NOT get destroyed during this process? I’ve seen all kinds of videos using wet rags, and some of the heat protection gel.

January 28, 2021 2
Asked a question
Step by step shaft adaptor removal and replacement

Gosh. I’m really messing this up, and I have to learn removal and placement of modern shaft adaptors. . I am destroying adaptors, and have got to practice. I can easily take the adaptor off, but the...

January 27, 2021 2
Posted an answer
Maxfli products

I’ll second that. Love to spread the word on Maltby!

January 16, 2021 5
Posted an answer
Swing weight change with lighter grip

Thanks Riafoone!

January 16, 2021 5
Posted an answer
Maltby M890 Driver review

Gard. Thank You. I’m looking for a replacement for my old Taylor 560. This could be it.

December 15, 2020 5
Posted an answer
Driver shaft recommendation

Maltby Pro series here as well. Popped one in my 3 wood and love it.

December 15, 2020 5
Posted an answer
Lighter, higher launch iron shaft I

Hey Ken. Another idea. I’m 67, and now play the steel Nippon. Very easy to swing. Things don’t have to be graphite now. Couple of models from Golfworks. I also installed the pro inserts. Great feel,...

December 15, 2020 5
Posted an answer
Built some irons

Bang69. I’m a senior at 67. Glad you reshafted for your Brother. Fun isn’t it. I play Maltby in the forged designs and if your looking for a great light weight shaft again take a look at the Nippon...

November 5, 2020 5
Commented on a post

Thanks Britt.

October 22, 2020 2
Commented on a post

Sorry, that should read TE, rather than KE.

October 21, 2020 2
Asked a question
Canadian availability of forged irons

Just glancing at our Canadian website Golfworks.ca. If the PTM, and the MMB, and the KE in chrome are all disappearing, what’s left other than the TS series? Heads for the PTM and MMB are still being...

October 21, 2020 2
Posted an answer
2021 releases update?

Thanks @Britt. Glad the TE model will remain in the line up. Next to the MMB my favourite design. I’m not big on the DBM finishes as others. Unfortunately  I do not see the TE model on the Canadian...

October 14, 2020 5
Load More