The shim you would need would be our SHIMT. For the ferrule, if you want just a basic black ferrule, our 65TI is .500″ long and will work. You would need to finish off the ferrule if you want it flush to the hosel, but that is a process that is required for most ferrules if want the ferrule to be flush with the outside diameter of the hosel. Any of our epoxies that are designed for shafting can work. The most popular and the ones we use in our production and assembly are the VB1001 Max High Strength Epoxy, the VB1002 Max Strength Tour Set Plus, the standard EPX1 High Strength, the PSSE Tour Set or the TSPE Tour Set Plus. The differences (gel time, usable cure time, full cure time, psi) in all of these can be seen on the chart on page 132 of our catalog. The digital version is online. Hope this helps.