New some new wedges and have decided on the Maltby DRT wedges. I have also decided to ditch the 60d wedge as it has always been a liability in my bag. I am a high handicapper with a shallow swing (sweeper) and I do not get along with clubs that have wide soles and high bounce. My current PW is 47d and I am thinking of going with a non-traditional 3 wedge setup

DRT 52/6 S grind gap wedge

DRT 58/8 S grind lob wedge bent down to 56/6

And for my dedicated sand wedge a 56/12 S grind.

Is this setup crazy?

Britt Lindsey Answered question

So you’ll end up with two 56’s with different bounce? The point of the S grind (as I understand it) is to accommodate shallow swingers. You might consider leaving the 58 alone and see how you get along with it before bending it, which will alter the offset. Just some thoughts. I’m also in the process of building some DRTs, but only need a 54 and 60. I chose the S grind for both, but I have a 54 A as backup if the 54 S doesn’t work out for me. I feel your situation.

Steve