Clubmaking Forum

I agree with Britt regarding the DRT A Grind being a bit better than the TSW for use in neutral to softer conditions. I also had a tendency to hit the TSW somewhat heavy (or "fat") in softer turf conditions. ...

Britt has provided an excellent response to your question.  What I would add is that, as I get older (I am now 76, and still swing a 5 or 6 iron between 80-83 MPH, but I was up in the low 90s until about...

In direct answer to your question, that .750” BBGM should be from the bottom of the bore, so it will be about .935” from the bottom of the .370” step to the ground measuring straight down the bore...

I have built and played three of the Maltby DRT wedges (50* G Grind + 54* & 58* in the A Grind), so I will give you my take on this subject:  1.) Working backwards, I would HIGHLY recommend the G...