Does anyone have experience/data comparison of UST Dart V TSPX 90 “R” versus Steelfiber 80 “R”? Torque appears to be similar for both. Curious as the stiffness relative to one another.
Great! Thanks Jim.
I recently purchased UST Gold 65 A flex for my driver and 5 wood. The 5 wood is performing great but I’m having a bit of trouble getting the driver through so considering the lighter weight Gold 55....
Thank you for the info Britt. This helps.
Have TT DG 105 R flex shafts and looking to try TT DG 95. Reviews suggest the 95 in R flex may be too soft. Anyone have data to compare bend profiles of 105 R to 95 S?
Thanks
I’m planning to build a Maltby KE4 TC driver at 44-1/2”. Expect I will need to add 3-4 grams weight to keep SW in line with D2. Is there any difference in driver head performance (trajectory) if I...
Rlafoone, would it be possible to also post the bend profiles for the UST Gold 55A and Rapport Blue 50A per Britt’s post? Thanks to you and Britt for the help.
Looking to replace UST ProForce V2 55 A flex shaft in driver. Like the shaft but not a fan of the yellow paint. Appreciate ideas on shafts with similar flex profile. Weight in the 50-60 range.
I have some graphite shaft pulls that if glued to the bottom of 1.25” bore will make the irons 0.25” short to desired length. Instead of dealing with shaft extensions on the butt end, will glueing...
Getting older/weaker and needing to transition from light weight steel. I built a test TS-1 8-iron (6-iron is my longest iron, 150+ yds) with Pro Series "A" flex shaft at standard trim and 1/2" longer...
Great info. Thanks for the help.
Looking to replace shafts with Nippon Pro 850GH R flex. I currently have FST 90 A flex and I have used the XP 95 R flex taper tips as well. I would appreciate some insight on how the Nippon shaft compares...