I have a set of Hogan IPT's with rusted and damaged shafts. Since I intend on playing them, I don't mind changing to a modern steel shaft but do not know the correct tip sizes, straight or tapered, etc....
I am repairing a chipped Persimmon driver head. I have been reading Ralph's manual (4th Edition), May 1988. Ralph says to use either high shear or high impact epoxy depending on the part of the club needing...
All my KE4 woods have a weight that is labeled "Trajectory Control. I cannot find any information as to what changing weights will do. Is there a chart or can you direct me?
What setting is best for getting a draw bias on my driver? I have reviewed the setting chart but not much information was there to let me know what to expect from the various settings. Thank you!
Thank you Britt for your attention to this and help! Your taking an interest in my question is one of the reasons I do business with Golfworks and Maltby clubs. Frankly, I don't know what I want because...
The Callaway has a Project X Hzardus shaft on it. The only shaft you have for that company for a hybrid that weighs under 70g's is a Junior. Huh...
Well, I think I am out of my depth here. The Callaway XR has four markings on it in a colored square divided into 4 sections: Top-Red says 5.5, Right Yellow says 58g, Bottom Silver says mid-spin and...
Thank you for the reply. I'll do those measurements and will try a different swing weight. I can't see anything wrong with the club or the shaft.
I recently bought a KE4 19 degree 3 hybrid to replace my old Callaway Steelhead 19 degree 3HB. I am having contact issues (hitting off the toe, thin, sometimes very high, a persistent heavy fade, etc.)...