Hi there! This summer I'm adding a TC Pro 6 hybrid to my bag, and planning to re-shaft my hybrids with the new MPF Pro Series shafts. I am deciding between the MPF Pro iron shafts and MPF Hybrid shafts...
Thanks Britt, exactly what I was looking for. You are right, the M890 is a great shaft. I'm not the fastest swinger anymore (driver 92-95 now-days) but have decent tempo, and tried an R flex M890 shaft...
Hey Britt, I'm seeing a couple new iron shafts on the website, the Maltby MPF Pro Series + and the MPF Maxflex. I'm guessing the overall profiles are similar to what they replace, but looks like more...
So Britt, would you say the new Pro Series + iron shaft flexes play a little softer compared to the same flex in the Pro Series they are replacing? I use the A flex iron shaft in my 4 and 5 IST hybrids...
I saw these on the US website today, but are at this time unavailable. I'd love to know more about these though, and how they compare to the MPF Pro Series iron shafts they are replacing! I'm using...
Ohhhhh.... I'm sooo excited! These are so hard to find unless you are custom ordering from a big manufacturer or finding one used with a ladies or senior flex shaft... Can I pre-order now please?...
I'll say, my decent angle with my 7 iron isn't even 45 degrees according to my Flightscope Mevo+, and have no problems holding greens.. I've always struggled with spin and trajectory due to how I deliver...
I'll also say, the M890 shaft has worked better for me than expected, given the target demographic for this shaft. I'm not a "slow" swinger at 93mph driver swing speed, but do prefer a softer and more...
Agree! I would love to#6 hybrid to the bag. Even Freddie Couples dropped his 6 iron and moved to a 6 hybrid.. I think it may become more accepted as people realize the benefits of higher lofted hybrids
In the past for one off builds, I've just clamped the shaft in a vice, and used my angle grinder with a cutoff wheel. As I started to build more, I picked up a mini chop saw with a cutting disc (3" disc...
Thanks Britt, Sounds like Rapport R and MPF A are the better choices.. and will come more down to which weight I prefer. I might have to try 8-10g of lead tape on my current M890 shafts and see how...
Hello there, I've been playing R Flex M890 shafts in the TS3 heads now for a few weeks, and we are getting along fairly well... best feeling irons I've hit in as long as I can remember! Launch and spin...
Thanks Britt! Good to know about the Kinetixx.. I keep hearing good things about the Pro Series, so I think I'll try the Pro Series DR shaft in R flex and leave the tip and butt a little long, choke up,...
Did a little more searching to narrow down some options in the fairway woods... Pro Series DL A flex and tip trim later if too soft Pro Series DL R flex, leave tip longer and trim later if too soft Kinetixx...
Thanks. Yup, I have a shaft puller and thought about doing just that.. leaving the tip long and trim down as needed. I really don't have many issues adjusting to different flexes.. so I'd rather go...
Hi there, I'm ordering a KE4 TC Pro IST series fairway 7w head to replace my Ping G400 7w with HZRDUS Smoke red 5.5 60g shaft. For the most part, I like the HZRDUS, but wondering what other inexpensive...
Hello! I just put together a new set of TS3 irons and R flex M890 shafts... which really came together nice and feel great. To that set I also added a 52 and 58 degree TSW wedges, along with the same...
The Nippon 950GH feel great... really smooth shaft. Just trying out some lighter weights and trying to stick with graphite, but the 950GH is awesome. Probably my favorite steel shaft.
That's my only concern with the MPF Pro shafts, are the comments I read about how much stiffer that shaft plays. I'd probably need to consider an A flex in the MPF pro to get the feel I like. I fully...
Hi there, Looking to update my irons and purchased a TS3 7i head with M890 High Launch shaft in R flex to test out compared to my Mizuno 919 HM Pros with Recoil 95s in F3. My 7i carry is about 145-148...