Aerotech steelfiber 95 or 110cw Stiff. These play slightly stiffer than most stiff shafts. Maybe consider the jumbomax UL and use tourlock weights to counter balance.
I did this with the orange moment X. It feels good but doesn't zero torque. There's too much weight in the back of the putter head. The face doesn't stand up perpendicular to the ground like a LAB. Might...
Go with what you think looks best. You can't go wrong. I have the TS4s. Love them.
I have the TS1M 4 and 5 iron. They're awesome
I'm trying to lower my ball flight. I have steelfiber fc90cw shafts, F3. I hit my 8 iron 155 pretty straight. If anything a slight draw. Would hard stepping lower the flight and possibly give me...
Would be 100% interested in a heavier graphite iron shaft
If my driver launch angle is 17⁰, would I need a low launch shaft and low launch head to lower it. I currently have the Max head with UL stiff shaft. Driver swing speed is 101 with a smooth tempo. ...
Did your iron shaft MPF test. It spit out 4D1M, but I don't see any shafts that match that result. What would be the closest in graphite? Thank you.
I have the Moment X orange. I bought the left hand putter neck to experiment with the zero torque. Is it possible to remove the 2 tungsten weights?
I know it's recommended to not bend the TS4s more than 2⁰ but is it possible?
I would love to convert a maltby putter to zero torque and test it out. If you have an affordable way to do it, I'm in.
What about tip trimming the pro series stiff shaft 1/2" less? Also, can you tell me the swing weight with the pro series stiff ts1im 5 iron 38.5" and 39" with a jumbo max ultralight small grip (48g)
Just built a driver with the Max head and pro series DR shaft, regular, tipped 1/2". It feels great! I also put together a ts1IM 4 iron with an Aerotech fc90 355 tip regular (f3). It doesn't feel and...
Let's use a 355 tip Aerotech as an example. 95g stiff vs 95g regular. Why would you soft step the stiff vs hard stepping the regular?
When comparing 2 iron shafts of the same model but different weights (let's say 75g vs 95g), how is the weight distributed in each of the shafts? are the walls thicker in the heavier shaft? more weight...
Recently received my TS4 heads with Aerotech fc90 355 tip shafts. When inserting the 355 tip into the hosel there's a lot of wiggle room. It's that normal? I also have a 370 tip Aerotech shaft that fits...
When adding extra length, does that change the performance of the shaft? Like 3/4 to 1" extra. Thank you
This is a follow up to a question asked on the golfworks.com If the iron shaft is offered in both tips, why would a golfer choose a 370 tip over a constant weight 355 tip? After trimming a 370 tip, the...
I\'m getting ready to pull the trigger on TS4s, but I\'m curious about the new KE4 forged irons. As far as looks go, will they have a player profile similar to the TS line or more game improvement profile...
Srixon