Posted an answer
Shorten Odyssey Stroke Lab Putter

A way I have found to remove a metal shaft butt weight without endangering the graphite shaft is to heat up the end of a metal rod with a torch then hold the heated end of the rod againt the metal butt...

January 1, 2021 5
Posted an answer
What tip do I order for mizuno mp-57 irons?

Before ordering shafts, pull one first and measure it. Occasionally a previous clubmaker has bored out the hosel to parallel if they were previously reshafted - not likely, but a possibility especially...

September 7, 2020 5
Posted an answer
Shaft flex points

Riafoone's comments are true as far as they go, but you are correct that flex point also affects trajectory. Riafoone's comment that the frequency (stiffness) affects trajectory is true. the stiffer the...

September 7, 2020 5
Posted an answer
Bending old club heads

If they are forged they should hold the new bend angle fine. Except hitting the clubs regularly can gradually change the lies and sometimes lofts. That happens quicker of you hit off of mats and hit down...

September 7, 2020 5
Posted an answer
So am I doomed

How could he not know how it happened ... unless he loaned it to somebody else without your permission. Not knowing sounds pretty fishy.

July 31, 2020 5
Posted an answer
Maltby MPF Pro Series UL Graphite Wood Shafts

... or buy the washer and screws kit for removing them.

July 31, 2020 5
Posted an answer
Reshafting PXG irons

I used to work at PGA Tour Superstore and that came up there. PXG has special shims you are supposed to get from them to reshaft the heads. From what we could see regular shims made for that particular...

July 31, 2020 5