Commented on a post

Thank you Britt! I saw the wood ones on there but not the hybrids.

April 14, 2021 2
Asked a question
Looking for original Taylormade Rescue TP Hybrid Sleeve

If anyone has one... this is the red & black one that came out with the R9 TP Hybrids.

April 12, 2021 2
Commented on a post

Mahalo Britt!

January 25, 2021 2
Commented on a post

Thank you Britt. As always great info. It is a “S” flex. So, since my finished tip to first step is 8” and assuming that the untrimmed length is 9”, I would think I am good as that would be 1”...

January 22, 2021 2
Asked a question
Help with trimming KBS Tour 90 370 Parallel tip shaft

Just want to make sure that I am doing this right. I wanted to know what the FINISHED trimmed length is for a KBS Tour 90 370 parallel tip shaft is for it to play stiff flex. Right now, for example I...

January 21, 2021 2
Commented on a post

Thank you Britt!

September 11, 2020 2
Commented on a post

Thank you Britt! This really helps! I knew static stuff but could never have it come out correctly when I changed to different sets. Is it safe to say epoxy would add about 1/2 to 1 SW but would be offset...

September 11, 2020 2
Asked a question
Achieving D2 finished/gripped swing weight from raw ungripped swing weight E0/E1 - any formula?

Aloha! I was wondering if there was a calculation I could use to determine finished Swing Weight from a raw shafted iron without grip on yet. In other words say my raw shafted iron was E1. Then I added...

September 11, 2020 2
Commented on a post

Thanks Britt! It has been a few years but I used to grind my old time wedges. They were all raw so it was easy and I used lead tape to balance the weight and couple of times reshaft and add weight in the...

September 6, 2020 2
Asked a question
Grinder to grind Wedges

Since we are on a 2nd lockdown, I was going to experiment with grinding some of the bounce on my wedges. Is there a grinder anyone of you experts have used and recommend? Mahalo in advance!

September 4, 2020 2
Commented on a post

Thank you Britt!

August 24, 2020 2
Asked a question
What is the maximum extension one can put on a, graphite iron shaft?

I have a Recoil 95 F4 5-iron shaft that was mistakenly cut on the butt end and installed in a 9-iron by an inexperienced clubmaker. 335 tip. Can I extend it back 2" with a shaft extender and reinstall...

August 20, 2020 2
Asked a question
Help with Grip Vise - the knob seems locked / jammed

I moved my grip vise clamp from one end to the other and now the adjusting knob is stuck or frozen. Is there a trick to releasing it? thank you in advance !

August 20, 2020 2