Just picked up a set of the Paderson Ballistic shafts. Looking to see if anyone has used this shaft in the PTM or DBM heads. Worried about the mid-high launch Padersons in the higher launching DBM, but the blade length of the PTM is a bit more than I\’m used to. Thanks
The Ballistic shafts are a really good product. The PTM irons have slightly lower lofts than the DBM, so that would be helpful if you are worried about to high a trajectory with the mid/high trajectory of the Ballistic shafts. Other than that, the only way to know for sure is to try them. Might also consider the TS-1 or the STi2 irons. All of which have similar lofts to the PTM with shorter blade lengths.
Britt Lindsey
If you bend them strong, you will reduce the bounce. The DBM only have 2 degrees of bounce through the #7 iron, so if you bend them 2 degrees strong, you eliminate the positive sole angle on those clubs. 2 degrees of bounce is the minimum I like to see on irons. So, before you bend them strong, you might try them. You may not need to bend them.
Britt Lindsey
Didn’t even think about the bounce on the DBM. Thanks for the heads up
Thanks. I’m gonna stick with a black head, so I’m debating having the DBMs loft bent a little strong.