Need Your help in finding Info for these shafts
1st one is a .370 41″ Iron Shaft with 13 1/2 parallel sect & 13 steps USNLIAL
2nd is a wood shaft usnttxl 18 step 13 1/2 parallel sect 48″
3rd is UYEST -37 shaft
4th is 100693 12 1/2 tip 14 step
All help on Trimming Measurements & Specs on these shaft. I’m going for a Reg flex
I have gone back a couple of years and I can not find those True Temper part numbers. My suggestion would be to contact True Temper. I will continue to look, but coming up empty right now. All I can tell you is my guess is the USNLIAL shaft is an L/A combination flex of whatever shaft model it is. Guessing the USNTTXL is a variation on a TT Lite XL, but can’t be for sure and no idea on the flex. Our part number for that shaft was different. UYEST should be a putter shaft, but again, not a part number I am familiar with. I have nothing on the 100693.
Britt Lindsey
Gary,
If you can give me some more information about these shafts I might be able to help you a little more. Not just how many steps but what are the step measurements?
1. The USNLIAL is a A/L combination flex. Knowing the step measurements would help me to identify this shaft or which True Temper shaft it was patterned after. This shaft may have been made for a specific manufacture. Do the steps measure 1.5″ or 1.25″ etc. That information is helpful.
2. The USNTTXL is the same length as the TT Lite XL R/S combination flex wood shaft and has the same tip to first step measurement. The majority of the steps in a TT Lite XL wood shaft measure 1.5″.
3. The UYEST is a putter shaft which we currently stock. https://www.golfworks.com/true-temper-stepless-steel-putter-shaft/p/uyest/
4. 100693 if you can tell me how long it is and what are the step measurements. Even knowing the butt diameter of the shaft can help with it’s identification.
Hi Jim; The USNLIAL steps measure 1.25″ for 11 steps then 2.5″ for top 2 steps
Also confirm most steps are 1.5″ on the USNTTXL except for the top 2 which are 2″ & 3″ can you help with trim chart for this shaft.
I also have some True Temper Rocket Sensicore shaft that are Stiff flex ; Is there any way to trim this for a Reg Flex [if not i’ll have to sell these]
the 100693 true tempers have a .580 butt dia steps are 12 steps @ 1.25″ while top 2 steps are 2″
Again all Help Appreciated!! Gary
Thanks Britt, I tried True Temper 1st & i’m guessing they’re not supporting past products.
I had made some notes about these shafts before we moved homes. & my quad bypass & hip replacement, but they are missing.
Appreciate your time in checking these out.
Thanks Again ! Gary