Putting together a set of ts3 irons with nspro 950 taper tip irons. Any suggestion for a ferrule that will match the od of the club hosel?
Britt Lindsey Answered question October 16, 2024
Putting together a set of ts3 irons with nspro 950 taper tip irons. Any suggestion for a ferrule that will match the od of the club hosel?
The link below will take you to the ferrule page with the 91TI or the 93TI, which should be close to flush and may not require much if any finishing. However, I would suggest a 98TI or a 99TI that are slightly larger. You would most likely have to turn those down a little, but that is the best way to get the ferrule flush with the hosel. After turning down the ferrule, you can finish with a brush or wipe of acetone to shine them up. If you do not have the tools, experience or desire to finish them that way, then the 91TI or 93TI would be the way to go.
https://www.golfworks.com/355-tapered-iron-ferrules-black/p/btif/
Britt Lindsey