Clubmaking Forum

The TC Pro driver is 💪🤌

August! 😢 Season is practically over by then.

You'll have to use the UNIVERSAL ALL-FIT MASTER GOLF IRON ADAPTER SHAFT HOSEL & Nut from All Fit that requires you to drill out the hosel and install the adapter. This would allow you to use the system.

I don't remember there being an adjustable hosel KE4 hybrid 🤷

It's .355 taper tip.

If you can bend the stem to a vertical angle, a knucklehead type hosel will work for it. One like this: https://www.ebay.com/itm/154271020403?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=R9PtqYmERvi&sssrc=2349624&ssuid=8pAUPM2sTGK&var=&widget_ver=artemis&media=COPY...

I start by using dawn dishwashing liquid and water with a hosel brush to break down the oil and then do the acetone on a q-tip to make sure that everything is residue free.

I've got a driver. Shoot me an email at rcslade@hotmail.com and I'll send you pics.

Is the hosel thick enough to ream out to 370? Given its a hybrid I'm guessing it's a little bit thicker.  I was easily able to ream out some of the CT250 hybrids back in the day from 350 to 370.  Not...