Clubmaking Forum

discuss, ask and learn about golf and clubmaking

Commented on a post

Britt is laser etching the "M" in the steel finished front of the crown anything that could be possible? I see the valid points from both sides of the debate. Being pretty active in the forums, a lot of...

February 26, 2025 2
Commented on a post

Hey Britt thanks for the response! Sorry about that, I forgot to mention yes, they're in my irons. That's good news about the new XS and old S shafts lining up pretty closely. They'll definitely be on...

January 14, 2025 2
Asked a question
New Pro shaft question

Currently I play the MPF in S flex and really love the bend profile and feel. My SS and delivery has always been between S and XS profiles depending on the brand so the MPF S flex is right in my zone....

January 10, 2025 2
Commented on a post

Thanks Britt! That's great news! I plan to play the Max through 2025 so that's awesome timing for me :)

January 2, 2025 2
Asked a question
Carbon in the future?

Hey Britt (or anybody else who can answer). Does Maltby have any plans to use carbon on any upcoming drivers or woods? Currently playing the Max and really like it. I couldn't help but wonder what you...

January 2, 2025 2
Commented on a post

Ultimately what you did is the best move. Maltby clubs are so inexpensive that buying a built 7 iron and then having it adjusted to your specs will give you the most accurate fitting results. Hopefully...

November 11, 2024 2
Commented on a post

I've been using mostly the Maltby PTM-4 blade style putter. But I also have a PTM-5 Mallet putter. Both are exceptional! In the world of putters, there are those who like some kind of insert and those...

November 10, 2024 2
Commented on a post

I'll throw in ball markers as an idea too! Just a matching silver badge like what's on the new models would be an awesome touch to round out a Maltby bag set!

October 10, 2024 2
Commented on a post

I would say that the 1 main issue most run into when playing a shorter driver is the reduction in swingweight. Swingweight is a general measurement that suggests one's ability to feel the club head throughout...

October 3, 2024 2
Posted an answer
MIter saw or cut off tool for cutting graphite shafts?

A miter or chop saw will work but make sure and use a cutting disc instead of a saw blade. I got mine at Harbor freight for like $35 and it cuts through steel and graphite with ease.

July 1, 2024 5
Commented on a post

Pete57 looks like you may have just gotten a defective shaft. I've been using the A flex 45g version of this shaft for over 2 years as a makeshift Autoflex or "OttoPhlex". My swing speed is hovering around...

June 7, 2024 2
Commented on a post

Gabe's been awesome to work with and is really hyped about his growing education in Maltby gear. I'm working to convince him that a set of TS3's need to go in his bag. Additionally, I'm working on getting...

June 1, 2024 2
Commented on a post

And they are AWESOME!! Just hit mine tonight for the first time. Best I've ever used!

March 31, 2024 2
Posted an answer
Having trouble removing Taylor Made adaptor

Butane torch is the way to go! Like others have mentioned, do it in 15-20 second intervals then pull. Keep doing it until the epoxy breaks free. The potential danger is that butane heats up much faster...

February 8, 2024 5
Commented on a post

Hey maybe Maltby could get in the door like Takomo did with Wesley Brian. Build her a spec'd out set of TS4's and send them via Dicks to try out :D

January 30, 2024 2
Commented on a post

Oh trust me, plenty of Maltby players have set him straight on the port screw situation . So far the chatter back and forth between new eyes and "the initiated" has been really great. A lot of really loyal...

January 12, 2024 2
Commented on a post

Thanks Britt! Any info on construction materials?

November 3, 2023 2
Asked a question
New Driver Pics?

I may have missed this somewhere but are there any pics and design specs on the new Pro driver? Thanks!

November 3, 2023 2
Asked a question
KE4 FDI or MAX Hybrid Driving Iron?

I'm considering a Hybrid iron. Was looking at the KE4 FDI 19° but then thought about maybe the MAX 4i hand picked at 19° if available. Which would be the better option for a higher launch and/or spin?...

September 3, 2023 2
Commented on a post

To add to this, if I have been using the original TS1's with shafts +.5", and I intend to pull the shafts to build a set of TS4's, would I have a problem or would the bore depth be about the same for both?

May 3, 2023 2
Load More