Clubmaking Forum

discuss, ask and learn about golf and clubmaking

Commented on a post

Thanks Britt, appreciate your help will flatten the lie a little as you suggested. Cheers Colin..

July 31, 2023 2
Commented on a post

Mizuno said only a Mizuno trained fitter would be helped, I might try removing the adapter in the MP18 head as I'm not going to use it so if damaged no big deal. Can I ask plz what does using a 6 iron...

July 25, 2023 2
Asked a question
Mizuno iron adapters?

I bought 2 Mizuno demo heads to see which one I like, the MP18 6iron has 28deg with reg flex steel shaft and I bought a 919 Hot metal 7iron head only. Lucky the adapter fits both heads and I've decided...

July 25, 2023 2
Asked a question
Adding Hot Melt..

Is it possible to add hot melt to my Mizuno MP Type 2 driver head as I can't see any holes, can I put the hot melt in the channel on the sole. I'm trying that rather than lead tape which I don't have,...

April 27, 2023 2
Asked a question
Irons face marks playability?

Looking at buying another members irons but they have ball striking marks on the face, he's a scratch golfer and still gets the same results when he hits the ball. I'm wondering if they will work for me...

April 16, 2023 2
Asked a question
Mizuno Widex'll driver 12deg

I love the 5wood but hate the driver because it's offset, I'd hoped to use the driver as a strong 3wood and off the Tee when a driver was inappropriate? But when I tried to use it it looked wrong and I...

April 8, 2023 2
Commented on a post

I've looked on eBay but not seen yet a head that size and loft, I've a 13.5 cobra 3wood but doesn't look or feel good to me. Do you have any suggestions I could look at, I really like the 5wood so would...

February 22, 2023 2
Asked a question
Offset Driver ..

I've got a offset driver head that I don't like how it sits on the grass behind the ball, it's a Mizuno 12* Widex ll with a ladies flex shaft that I like maybe because the head is small I want to use it...

February 22, 2023 2
Commented on a post

Thanks Britt, You've given me more info so I'll keep looking, appreciate your feedback. Cheers Colin...

February 13, 2023 2
Asked a question
Acquired a Wilson Lady 7 wood..

Was in a few sets of clubs I was given, I liked the feel when I had a few swings and decided I'm going to hit a few balls with it for fun. But the steel shaft is very different with a TWIST pattern near...

February 12, 2023 2
Asked a question
The photo i couldn't attach

Sorry the photo I missed

December 4, 2022 2
Asked a question
I don't understand what that changing loft means?

My Mizuno MP Type 2 Driver head adapter is different to the other brands I've used, where STD loft is 9.5 if I set it at 9.5U what happens to the lie flatter or higher? In the attached photo does the three...

December 4, 2022 2
Commented on a post

Lots of utube video on utube if your nervous, but really easy peasy because your not reusing the shaft it's broken. It's a free hit to start, have fun...

October 31, 2022 2
Asked a question
Mizuno MP Type 2 Driver head?

I've tried to get info on this head to understand why it likes me, I have a Hzrdus Smoke shaft that didn't work for me using a number of different heads. Such as, Taylormade R7 R15 SIM, Ping G, Callaway...

October 28, 2022 2
Commented on a post

Thanks have sent email, will advise reply...

October 8, 2022 2
Commented on a post

Thanks@Popeye, I will look for a shaft like that.

October 6, 2022 2
Commented on a post

NO EZ stamping, I tried to include a photo but your site says my photos too big but I've posted this photo twice on blogs with no problem...

October 5, 2022 2
Asked a question
Mizuno Zoid Comp ?

Trying to find information on these irons, did find alittle on EZ version and wondering if that's the same irons. Had some chipping with the S/W which is 56degrees loft. Found that I could get better bite...

October 4, 2022 2
Commented on a post

I lived in Sydney for 33 years but although I've lived overseas for 40 years I was born in New Zealand, but thanks for letting me know "Club Champion" is in Sydney. I will get in contact with them and...

October 2, 2022 2
Commented on a post

Ahhh sorry Jim I know that shaft won't fit my Taylormade SIM driver, I was trying to ask if the specs of the hybrid shaft that I hit well would indicate which driver shaft would be best for me. I'm guessing...

September 30, 2022 2
Load More