Clubmaking Forum

discuss, ask and learn about golf and clubmaking

Commented on a post

by your golf glove size.

December 27, 2023 2
Posted an answer
changing lie angle

Buy a bending machine from GW and watch how much ffun you can have----PS, it is not rocket science and easy to learn.

December 23, 2023 5
Commented on a post

The bestanswer is, of course, buy a swingweight machine from GW----OH, just go ahead and do it---they are fun to play with and you will never regret it ! :)

December 23, 2023 2
Commented on a post

Hummmmmm----I started fooling with this stuff back in the 60's----my suggestion is much the same as i give when people ask me about playing golf. If you want to start playing golf, that is easy, by some...

December 23, 2023 2
Commented on a post

Here is what I did and still doing. I looked at as many refinishing vids on you tube. I found that I think I can do it, I ordered a booklet from Caswell (sells ll the stuff you will need) on how to do...

December 23, 2023 2
Commented on a post

It may be possible to find the clubs you used to have (not the actual clubs but the same modle) on E-Bay. If you do not want to that--then try reshafting the one you have--there is all kinds of help here...

December 23, 2023 2
Asked a question
Rechroming question

I am getting conflicting information.If I de-chrome irons--Do i have to use a seperate batch of acid to re-chrome or Can I simply change to polarity on the batch of acid I dechromed wit in order to rechrome...

December 23, 2023 2
Commented on a post

I must also say that just recently, I broke an old VIP by Macgregor--and bent the rest of the set. Only God knows !

July 3, 2023 2
Commented on a post

I understand what your saying--I also understand why you are saying what your saying. I am not trying to be arguementative.---or RUDE. I have followed these commentaries for a long time. I have read some...

July 3, 2023 2
Commented on a post

It would be most helpful if I knew wheather the button is glass or plastic---for removal purpopses. I susspect glass because the do not seem to scratch when I work on the one that seems too have become...

June 28, 2023 2
Commented on a post

Well, Brett---all of the commentary about not being able to bend, can't bend but 2degrees, will not stay bent--come from this forum.

June 27, 2023 2
Commented on a post

Thatmakes no sense--some of the question was left out. I have a set of dynapower wilson irons that I am refebushing--I have a button that is damager---I want to removed it--and wher can I get another button.

June 27, 2023 2
Asked a question
Wilson dyananpower irons--replacing the button

I have a set that I am refurbushing--I have a damaged button insert---how to replace and remove the button--I guess what to replace it with ?

June 27, 2023 2
Asked a question
OK--my experience bending Ping Golf Clubs

I bit the bullet--Took my Ping Eye 2 set and bent them from 2degrees upright too 2 degees flat. Did it 24 hours ago and checked them this AM---all lofts and lies stayed the same as I bent them. Bent them...

June 14, 2023 2
Asked a question
Lofts and especially lies for older macgregoprs and hogan

Need lofts for older hogans or macgregor : especially lies

May 23, 2023 2
Commented on a post

I am 83 and have played this shaky game for 0ver 60 years. There a'int no perfect set. The best you can do is getone that feels generally good to you.Club feel changes with the weather, you mind, what...

May 9, 2023 2
Commented on a post

My first consideration was to send them to you. But it was only 2/3 clubs and the cost for shipping and the wait time made me take it locally. Took them over to another and waited for them about 10 minutes....

May 9, 2023 2
Asked a question
BENDING hOGAN IRONS

TOOK A hOGAN RED LINE TO A KNOWN CLUB REPAIR OUTFIT TOO BEND A TWO IRON TOO A ONE IRON. tHEY CAN'T BE HOGAN IRONS BECAUSE THEY ARE TOO SMALL AND WILL NOT FIT IN THE BENDING MACHINE ????

May 8, 2023 2
Commented on a post

Before I got so old (83) , and could still hit the ball--I shot a 67 when was 66, They (whoever they or them is) started de-lofting irons. I still hit a lot of old standards from the 60's and 70's. The...

March 4, 2023 2
Asked a question
Old age (83) and lighter clubs

I know I cannot play much again---I  am trying lighter club weighting--most I can do these days is hit balls into my net--sometimes I play 5/6 holes.

March 4, 2023 2
Load More