Clubmaking Forum

Srixon Cleveland are one of the few I can't seem to get my hands on to measure.  They use to send product for our data base, but have not been able to get the new Srixon or Cleveland product for the last...

The link below is to an article on our web site.  Scroll to the bottom and you can download the latest worksheet(s) containing the shaft information on all the current shafts we are carrying.  You can...

Too early at this point.  We are working on a almost a complete overhaul of the Pure Track line and possibly a new addition to the MAX Milled.  With putters, until we get most of our initial ideas in...

We do not have any "authorized" fitters.  There are qualified fitters we do business with.  We do business with Art Sellingers facilities in the DFW area (Sellingers Power Golf, Sellingers Pro Shop). ...

The TS1 and TS2 irons bottom of bore to heel is approximately 3/4".  I have a 2020 Mavrik #6 iron and its BBH is 1", so there is a difference.  Important to understand that the tolerance can be 1/16"...

Not sure why they are not.  They should be and are probably in the process, but I will contact them.  They manage their inventory and it may be a case of just not getting there yet. Britt Lindsey

I do not see any of the UFW's laying around or in our inventory.  I will keep an eye out and post if I find any.  At this time, no plans for a shallower face fairway wood. Britt Lindsey

Yes, the DBM heads can be bent.  Both the original and the newest TE+ Black. Britt Lindsey

Difficult to say.  The Nippon profile is actually firmer in all areas of the shaft except the tip.  The DG Gold 105 does have a stiffer tip, and that might make the difference.  In my experience, shafts...

No need to, but you can.  Sanding beads or the quick center sand can be used.  If the shaft is a good fit it's not really necessary, but some like to use it anyway.  I will usually use just a little...