Clubmaking Forum

Those lengths are longer than our "standard length" for #5 and #7 woods with shafts under 70 grams.  I know there are always variances in how people measure, but the way we measure, the standard #5 wood...

Our guys use either the Testers or Krylon enamel paints.  Krylon dries faster.  Usually can get them at hobby stores. Britt Lindsey

The C6 Blue 60 is 63.5 grams and it's profile is on the softer side of an R flex.  Not saying that is the reason for your issues, but it is a softer and overall lighter profile than our MPF Pro Series...

Canada does not have the Custom Shop option.  You can order through the U.S. site and we can build and ship to Canada. Britt Lindsey

I will be, but do not have it to measure yet.  On my list to do as soon as I receive. Britt Lindsey

The Tensei AV Series Silver Iron shafts (MR0125) are very similar in profile to the MMT's in the .370" parallel tip.  We carry the MMT iron shafts in the .370" parallel tip (MR0090), but it is not available...

The Recoil Dart HDC 80 in r flex and the Maltby MPF Pro Series+ iron in R flex are very similar.  The MPF Pro Series+ might be fractionally more flexible in the butt section, but it's so small a difference...

The RT stands for reduced Torque, not Zero Torque.  The explanation statechamp posted is the description of the design.  As far as the weight, a standard build one I have in my office at 35" with a steel...

Having grown up in Texas and played a lot of golf there, I can tell you the S grind would be the best option in the DRT Series.  The 56 comes with 12 deg. of bounce and the 60 with 8 degrees.  That is...

Hosel tip diameter is .335.  Face angle was listed a Square to .5 degree closed.  Head weight was 200 grams.  COR was not and was never listed.  At the time COR limit was .830.  If it was a non-conforming...