Sting Stoppers might be worth a try. The link to them is below: https://www.golfworks.com/sting-stopper-vibration-dampening-insert-kit-12-inserts-tool/p/vg0002/ Britt Lindsey
The TGI could be an option, but kind of depends on the weight. The lighter weights have an overall softer profile, but are still considered firm in the mid and tip section, but just not as firm as the...
Lol, I get it. Will continue to check to see what we can do to allow it. Thanks for the head up. Never had this come up before. Britt Lindsey
The additional information I received stated the following: "We have some IP addresses from particular regions blocked due to spam. We assume this is the reason for the issue. It also could be the extra...
What jmagri78 said. Contact us by phone and a rep will be able to help you do what your asking. Britt Lindsey
Any of our irons should work with any shaft and grip combination you choose. Grips and shafts can help with the condition you have. With heads, as long as they are well designed and stable, like ours,...
It's not available for us to buy anymore. It is discontinued, according to Golf Pride. My guess is that they still have some through their "tour" options and that may be what they have on their website...
Not sure why, but I will pass the information along and see what I can find out. Britt Lindsey
Currently our assembly time for custom assembly of paks or or any custom builds is 10-14 days. Ship time to Sweden can vary depending on your preferred method of shipping. When you place the order...
If they are the "CW" option, they are .355" taper tip and they do not require any tip trim. Install and cut to final playing length from the butt end. If they are not the CW version, then they are...
Loft is the major factor in trajectory, so I understand why you hit it farther and lower. The current Graftech I re-designed a few years ago, but is very similar to the old one. It really is not the...
Based on your clubhead speed and your quick tempo, I would lean towards a Stiff flex, but there are other factors. Feel is one factor and analyzing the ball flight and spin would need to be considered. ...
Still going to be awhile. We are waiting on first CAD model. Have reviewed the initial 3D CAD. Once we get the model, we will review, make changes if necessary, then go to first samples. Could...
No need to apologize. Was a valid and good question. Never hesitate to ask if your not sure, or need information, or confirmation... Happy to help. Britt Lindsey
Definitely not us. Legal has been notified. Thanks for the heads up. Britt Lindsey
Do not have those irons yet. Will need to reach out to Callaway again to see when I can get them. Usually have them by now, so apologies, but will work on it. Britt Lindsey
I think adding a 56 degree is a good thing to do. Full swing 60 degree, with your speed, is harder to control and you do currently have a 6 degree gap between the 52 and the 60. Yes, of course you...
Lead tape towards the heel to create a draw bias. Britt Lindsey
Thanks for sharing, Haven't experienced that, but we don't remove grips with air. Removing with air takes some skill and the right tools and can be a little tricky depending on the grip. Generally...