Commented on a post

How would I be able to adapt it to my trusted vintage Ping Anser 2? bore the hosel to .370" or file the shaft tip to .355"?

January 25, 2022 2
Commented on a post

Any 3 wood primarily geared to teeing off in the works?

November 19, 2021 2
Posted an answer
TS3 TS4 Update

time to come home?

October 1, 2021 5
Commented on a post

Sounds good. Thanks

July 13, 2021 2
Asked a question
New Driver?

As a follow up to the previous post on new irons, are there any new drivers in the works? If so, will they complement the line that exists or replace some models?

July 13, 2021 2
Asked a question
old driver repair

My Wishon 949 G/TI Driver is chipped along the top edge of the its face. Seems as if there's a carbon fiber layer on the top of the club head . How do I repair this? A build up of resin and then spray...

June 28, 2021 2
Commented on a post

Thanks

May 18, 2021 2
Asked a question
3 Wood as Driver

I've been using the M890 3Wood with UST Mamiya Proforce Aflex shaft as a driver. Hitting an average carry distance of 185 yds fairly straight with a fade. I'd like to switch to a KE4 3Wood since I'm looking...

May 17, 2021 2
Commented on a post

Thanks for the thorough explanation. Most helpful.

April 23, 2021 2
Asked a question
Driver vs 3 wood lengths

As an example the M890 driver and #3 wood both have a 58 degree lie yet the driver is built 2" longer. What is the reason? Shouldn't the length be more dependent on lie as in the irons?

April 23, 2021 2
Commented on a post

I presently have an M890 3wood and a KE4 #5 hybrid. Can I assume that the KE4 #3 hybrid could fill the gap between the two?

April 2, 2021 2
Asked a question
KE4 Tour Hybrid

My understanding is that a KE4 Tour H5 hybrid is similar to a #4 iron. What long iron or fairway wood does the KE4 Tour H3 aim to replace?

April 2, 2021 2
Commented on a post

Thanks. I'll give the KE4 a try.

March 8, 2021 2
Asked a question
Hybrid M890 #4 vs KE4 Tour TC #5

Both the M890 #4 and KE4 #5  hybrids have similar specs, such as size and weight. Besides the obvious (shaft length, lie) what are the practical differences between the two clubs heads? Do they have different...

March 7, 2021 2
Asked a question
TS-2 general feel of club head

How does the TS-2 club head feel in actual play on the course? Compared to the STi2 for example, or even the M890? Does it feel soft or hard, or in between? How's the sound? Clear or muted? Any opinions?

February 10, 2021 2
Commented on a post

Thanks. I'll give it a try.

February 4, 2021 2
Commented on a post

Local golf repair shop and Ping confirmed that bearing was used in assembly.

February 4, 2021 2
Asked a question
Ping Anser2 shaft removal

Any ideas on removing a Ping Anser 2 shaft if it has a ball bearing? Should I assume epoxy was also used, or did they rely on friction fitting only? Short of sending the club to Ping, does anyone have...

February 3, 2021 2
Registered
February 3, 2021 10