Thanks Britt. I have to build one of these for a customer. Is anything sold from GolfWorks today that matches the MPF 55 shaft that came stock on these?
Hi all Way back in 2013 Maltby made a Tricept BM3 fairway wood in both 3 and 5. These clubs hit like three ton of bricks and I have a customer, believe it or not, who is still playing them! I can't fit...
I found this ->https://ozarkgolf.com/products/cleveland-launcher-xl-halo-irons?srsltid=AfmBOooQeb5jXFZ4FePv5Iqe0p2wXvAcbH6dhfZqC1k1WZWQ7koQLAQo . . . and at the bottom of that link it recommends "PROJECT...
Ok, so this is a little weird. I had a guy walk in my shop wanting me to put a graphite shaft in a Cleveland Halo XL iron #6 head. I thought for sure it was a standard 0.370 install, but from everything...
Thanks Britt. I understand that it's a combination shaft, but what confused me are the words on the trim sheet "butt trim only" across the top, but I can see now that it applies to IR1 and W1 only. Because...
I’m reshafting an Adams a120S #2 Hybrid. The tip size is .370. For a shaft I bought a Graftech Lite but I had to buy the iron shaft to get the correct tip size. My question is about trimming the new...
Hi Britt. Thanks for the straight answer. 50 gram back-weighting (nearly 2 oz) for this client has certainly helped dispersion, but they have only gained 2-5 MPH. Lead tape on the head was a bust however,...
Hello I went to the GolfWorks school in 2012 (taught by Jim Y) and since that time I’ve tweaked and built thousands of clubs. I have customers who are huge fans of counter-balancing. The best results...