Love this debate: Ball: Agree with Britt. One ball. It should be cheap, maybe even a roll back to soft, two-piece balls, something that fits the average player. Manufacturers will hate it because...

Add the thickness of the grip cap and you've got your equation. Note that finding the "heel" may present a potential problem if it is rounded.  To measure club length insert the shaft to depth within...

If you are intending to reuse the shafts, the info you really want is the height above ground level of the bottom of the bore. Subtract the bore depth from the hosel length. Brent could comment, but given...

Absolutely 100% behind both ideas, but I'm sure whatever changes that get made won't go nearly far enough to make a significant impact on the problem. Distance has done nothing but increase the cost of...

It's been a long, long wait. Since the groove rule change there has been nothing like this in readily available components other than perhaps the MMB, and even that had an uncharacteristically thick top...

I am also very interested in this question. In my opinion, certainly for an iron shaft, the lowest torque for a given flex and weight range is best. Looking at the Axiom specs, I have never seen numbers...

I feel rather strongly about not continuing the path towards ever stronger lofts. We are already up to sets with 4 wedges (46, 50, 54,58) or (46, 50, 56, 60) with some bending of the 56. Golfworks is...

I must concur. The TS-4 looks magnificently understated -- a clean, beautifully looking iron that just screams professional. The muscle back is a little bit raised towards the toe, just like the Staff...

Played the day after in nearly identical conditions wanting to confirm that my driver had truly become the perfect club. Same time of day too. Unfortunately, it was as if the old driver had returned...

Thanks for all of the comments. Now it is time for something truly bizarre.... The glue they used seems to be a lot like the rat-trap glue I've used in the past. Doesn't have to be that hot to get...

You highlight my concerns -- the two questions. How hot melts the glue but not the crown epoxy? Where to place to dampen vibration? I was out today in temperatures around 50 F. Even my low compression...

Things like yarn or cotton still need to be placed within the head and secured with a bit of glue. The head is probably otherwise not even legal. Seems to me that such "remedies" are about killing sound...

Our local golf shop is equipped to inject hot melt but doesn't have much experience.  I had 4 grams added to a Callaway Maverik driver head to improve the acoustics.  I don't want to hear the sound of...

I will be looking for the iron graphite shaft with the best tip stability and lowest torque in the $30-$40 price range.  Wasn't impressed with Prolaunch Blue.  Definitely impressed with Xcaliber.  Have...

Really appreciate these pictures. Matches expectations. The TS-4 is for me. Hoping to see this iron next summer maybe? Earlier the better.

Just wanted to reiterate that I anxiously await the arrival of the TS-4. There has been nothing available for a long time with the look and feel of a traditional blade.  Not even the MMB, with its thick...

I don't post here much but can't resist a good mystery. I went through a similar process recently (retiring). This allowed me to play more. (That can be good or bad.). So let's see if we can summarize...

When you say "used set of Pings" could you be more specific?

I posted on this yesterday but the bullet formatting did not work.  When I edited the post apparently I deleted it, or perhaps someone deleted it for me.  I will try again ... Years ago, before the...

Nick, you highlight my gripe with what virtually all manufacturers have done with loft in order to make consumers think the newer product is "better." Even The Golfworks TS-1 falls into this trend with...