Posted an answer
Maltby Bench Top Club Length Ruler measurements

You are probably measuring down the back of the shaft. The bench ruler is set up to measure down the middle of the shaft.

June 5, 2021 5
Posted an answer
KE4 TC adapters

Using the Drexel may have a negative effect.

April 4, 2021 5
Posted an answer
KE4 TC adapters

I've only done a couple of these and haven't noticed a problem. Both were for my personal use. But, I seem to remember the inside diameter being slightly large. The adapter seemed to go on fairly easy...

April 4, 2021 5
Posted an answer
Experiences with High Balance Point Shafts?

I used the Kuro Kage hbp shaft in a KE4 TC head and it works and feels just fine. Since I am old and in a quest to maintain distance, I build my drivers to 46". Usually I have to reduce weight in the head...

February 5, 2021 5
Posted an answer
Direct to consumers brands

Many of these DTC offerings are very similar to each other. Almost like the DTC golf ball. Put your name and finish on a Orient house brand and you are in business. Maltby is a big exception to this though....

February 4, 2021 5
Posted an answer
Maltby MPF pro series iron shafts vs. hybrid shafts .

Do to slower swing speed, I went the other way. Used the A iron shafts in the TC hybrids. Checked it out with Jim. Worked great. Murv

October 2, 2020 5
Commented on a post

Make sure you order a 2 gram weight to go with the head you choose and the lightest shaft possible or your swing weight will be E++. Order a one stiffer shaft due to the length. Don't order a light weight...

September 13, 2020 2