I keep seeing conflicting information. I think it's assumed this is a DGÂ (37.5") 8 iron shaft. The thing I don't get is the flex. Is it an S300 8 iron or an x100 8 iron shaft? Are they weight sorted...
I may have figured this math out... Dynamic Gold 120's have a .600 butt. Of course you trim that buuuut... Tacki-Mac: .600 shaft + .015 build up tape + 0.0625 OS grip = 0.6775 ? Lamkin: .600 shaft +...
I currently play Tacki-Mac Tour Select Full Cord Midsize grips (.600 core, 1/16" oversize, 55gr) with 1 wrap of Golfworks full size build up tape (GW1118) and their grip tape. I am considering a move to...
Britt, is the BBTG for TS3 and 4 the same? Thinking about picking up the 9/PW and just moving shafts
Also, if I was to just move shafts from the 9 and PW in TS4s to TS3's, would I run into length issues or is the BBTG the same?
I have played TE Forged for years. Love them. I've got 4-8 in the TS3 and 9 and PW in TS4. Standard lofts/lies and DG 120 S300 (.355; +0.5") throughout. The TS3 sole performs very similar to the TE Forged...
I'd look at the TS2 to match the specs and features such as the urethane filling the hollow face, stronger lofts, and larger head. It has great reviews. Or maybe the TS3. Doesn't have the features of the...
Thanks, Britt. That's great info!
I hope this hasn't been asked a ton and I just missed it but are there plans to add a wish list or something similar to accounts on the Golfworks site? Many times I don't need 1 single item right away...
Are there any pics or information on the TE+ and MG replacement wedges? Not sure if we even have a name for the wedges yet. I think I read the TE+ lofts mirror the TS3. Will they have more sole radius...
From a design point of view, why don't we see roll and bulge in utility irons as we do with hybrids any longer? I have some 2014 Adams Pro DHy's that have it. Seems to work with off-center strikes with...
Thanks, Brit. Do you know if the balance point was returned to the original NV for this year's? I think the NKXV was high balance point. Did they continue that or return to the original?
Has something happened with Aldila? I noticed it's neigh impossible to find Tour Blue and Tour Green shafts outside of eBay as well as the long-available green NV and orange NVS. I do see some newer NV's...
Just looking for the BBTG on the TE. Thinking of moving that's to TS3's. I think I've been reading the TS3 is about 1". I imagine TE is 1.25-1.5"?
I think I read a while back about the MG wedge replacements being worked on or in development. How's that going? Any specs or pics? These going DRM or standard finish?
With the TE+ being a 2024 release, should I be buying a few sets of standard TE Forged irons to keep in reserve if the standard TE is going away this year? I saw the TE+ post in February about "modern...
I had asked this on the old Golfworks site and after the switch I can't get the KBS FLT's to show up. I'm guessing they're just discontinued. But the question Jim answered was where the standard shaft...
Please don't jack the GW and PW more than 1 degree. I can mess with a 46* PW but when they go 44-45* it really messes the wedge gapping up. I can work with 22* 4 irons and 33* 7 irons. But 44* PW just...
"That's not how we've always done it!"
Britt, that's great info. I'm sorry to bug again but what is the BBTG for the standard TC for comparison? I see the spec sheet on the site says the bore depth is 1.185". I imagine you could get BBTG by...