That was one of my concerns as well. If only 1" was trimmed I think it would be the entire tip trim to get to most lengths. ex (4iron =41" shaft + 1"bore to ground -2.5"(IR11) - 1" extra Tip = 38.5" STD...
Curious if there was any profile change for tipping the TT Score beyond the IR11 spec would going a full inch extra cause any issues? Would this get closer to an XStiff?
Curious if I can order just the TS4 head with adjusted specs? (1* strong and 2*upright) Also, I know Strengthening the iron would decrease the bounce are there any other concerns to doing this?
Britt, Curious to get your thoughts on Edel's SMS irons and what that would mean to MPF obviously relatively minor weight being moved but still could impact COG.
I haven't seen any details on TS4 in the last month or so. Any other details that you can share? Is there an expected sale date?
Alright, I wasn't sure if there was a better choice from a spec/fitting side. So either is sufficient but both are plenty of work. I think I'll plan to soft step first and if I feel i need more length...
Preparing for the upcoming season and feel like I need about half an inch more in my irons. I have an extra shaft intended for 3i that I have not been using. What is the best solution Soft step my irons...
Woah you may need to throw a NSFW warning on this next time. They look really clean A bit of PTM aesthetics but more crisp lines. I got a 7i sitting patiently in my cart. Thanks for sharing the pic.
Britt can give you more detail but the TS-3 page is live. Spec table isn't loading but should be clear soon. https://www.golfworks.com/maltby-ts3-iron-head/p/ma0340/
Below topic shows TS-3 & TS-4 topline not sure how those compare to TS1. I think there are a lot of comparisons between the TS-4 & TE. https://ralphmaltby.com/questions/question/new-iron-picture-update/
Good Luck with the ERP changeover. Was chaos for our company for a few weeks transitioning over completely but mostly just internal struggles. Looking forward to the new changes.
I have kept an eye on the new TS3 TS4 and TS1-IM releases and was curious if there were any more pictures or angles you can share. I have seen the back image of the TS3 & TS4 but curious of sole and...
Can you share the topline width planned for the TS-4? Appreciate it.
Britt, Have you been able to get the samples of the TS3s? Are you planning to share pictures here or another location? Thanks
I know you have mentioned some new irons coming out to add to the TS1 and TS2 offerings I was curious how you would recommend blending these sets or if there is a consideration for that in the new TS3...
I ordered the Ke4 fairway 4 wood and curious what the differences changing to the 10 Gram weight would give me.
I was curious hos this value is determined for the iron heads. If I'm not mistaken its weight/area is this weight divided by the area of clubface or is this measured somehow?