Clubmaking Forum

Thanks Britt.

Hi, have a number of these from past builds.  And lost my cheat sheet of the trimming I’d done.  Can you tell me the length from the tip to the last letter, L in chemical of an uncut shaft?   Or any...

Thanks again Britt.

Hi Britt, appreciate the comparable shafts info, I do have a couple followup questions. The Rapport and the Vista pro are designated high launch, so those are out. I’ll look at the Proforce. You quoted...

Hi Britt, for reference here is our previous discussion. https://ralphmaltby.com/questions/question/kurokage-hbp-wood-shaft-r-to-a/ I did go with the A flex and it worked fine for most of last season....

Depends on course conditions for sure.  Softer ground and soft/lots of sand, square face you’ll be fine.  I had trouble when opening up the .90 model for higher shots, and off tighter lies.   Not...

Thanks Britt.

I asked on the GW site about the Fuji Pro Iron this question and Jim answered. Can you explain the difference between mid launch/spin and mid trajectory? And more details on the shaft profile/characteristics,...

Hi Britt, that rules out the NV. Yes, I’ve found that the Tensei 55 is a rare shaft. How does the KK reg compare to the Tensei AV Silver 60 gm in A flex that you do carry? Thanks,

Hi, can you tell me the difference between the Aldila NV iron shaft in A flexand the Tensei AV silver 55 gm in A flex ? I have been using the KURO KAGE™ 2 Gen Black Iron shaft in R flex and it’s now...

Thanks again Britt.

That all sounds good. A followup question , for the FW in Cypher would you recommend the 40 gm or 50gm? Hers a link to their specs. https://www.truetempersports.com/en-us/golf/cypher-20-graphite-wood-golf-shaft.html...

Another question, given my situation what do you think of putting Cypher shafts in my FW’s?

Played these in 50 Gram (actual 57) regular flex in my FW’s for 2 seasons , they were a huge improvement to deal with my declining swing swing speed. All woods are 2018 rogues.  Also switched at the...

Hi Britt , last year you advised that the KK 2nd Gen iron shaft was NOT counter balanced. There was an error in the Pak listing that called it HBP, which was corrected.  Only the wood shaft is HBP. In...

I’ve removed several in the past using the needle injector, start about 1,5” from the butt and work slowly giving the solvent time to creep.  I use naphtha.

Suggest you call them directly to be sure for your particular application. KBS seems to have a more complex system than most.

on their website. https://kbsgolfshafts.com/wp-content/uploads/parallel_trimming_sheet.pdf

Hi, looking at these, seems to be something for me, so I’m going to try one.  I need .355 for my Ping I20’s.  The softest flex is R+. As my iron swing speed is somewhere in the high ‘60’s , maybe...

Update, placed 2 orders from GW Canada by PHONE over the last few weeks. Handled promptly and delivered on time. They were out of a few common items, which I managed to workaround. Still cant look up...