Clubmaking Forum

Thanks Jim, the 1.0 is whats coming on the TM MOI Spider putter. This customer like many would like 2.0 or 3.0. I'll try heating a little longer as a test. Thanks Jeff

I'm seeing several .600 putter shafts coming in on the new high MOI putters. What grip options from Super Stroke are there? the .580 grips will not go on without my BFH Thank you Jeff Jones 10Shot

Thank you Britt, Jeff

Hello, Looking for OEM grip tape I find on many MFG. clubs. Its thinner, more pliable and much easier removed. I have a few customers that regrip a lot, and want new tape on each new grip. Its easiest...

OP, I've done about 7 CPM matched sets of clubs. All I can say is Jim Yachinich was right, if I charge a by the hour for a Frequency matched set they'd run you about $1500.00 just for that. Don't waste...

IMO, you can throw money away, or get fitted. If you're looking to throw money away check out GW "Deals" page then shafts. There isn't magical wand to shafts, seems to be a feel/flight window thing for...

Thanks for the reply. Tonight I'm going to file a V slot across the bottom of the weight. If that doesn't work tungsten powder

?, Swapping a set of UST Recoil 95 for a customer, and I cant get the air to pass out of the hosel. Not sure why, I wanted to ask. Looks like the lead weight base is to small for the V to pass the air...

Thanks, I think you answered it. Just got off the phone with this person, looking for rough/turf interaction. Maybe Hybrid instead, we shall see. Jeff

Ahhh, I see what you're saying. Keying in on turf interaction. thanks. The question from the customer caught me off guard. Thanks Jeff

Hello, GW folks Had a request for an off the deck 3 wood, customer said it's different then an off the tee 3 wood. That was the info from this person. What would be the difference between the tee and...

Thank you

Hello, the info you provided, is that from Russ Ryden software? Thanks Jeff Jones

Thanks Britt, I don't think its plated. Light sand, med and polish as I normally do to clean up irons. Ahh cleaning/regrooving irons that's just around the corner. Thanks again to you and your staff,...

Stamp is not deep, definitely not a full mallet hit. Hard to get paint to stay, wiping it removes it from the letter. Thanks

I received a Scotty with a little stamping issue, backwards E and an off center J on the back lower edge. Question, what would be the proper belts to use and, with what compounds. 120 Sand paper or Trizact,...

Thanks Britt, I ask for this update due to the new (crazy IMO) iron designs i.e SIM2 "Cap back", Titleist T series and all the buttons, rods behind the face, cavities etc. Also the new MIM cobra process,...

Any chance this document on your website will be updated? Thanks Jeff

FYI, I own GM1013. It doesn't work well at all. I purchased this unit about 4 years ago it may have been changed. 10shot

Hello Folks, I'm in search of an electric magnet for stamping. The one I purchased did not hold up, I see several OEM using them wondering, anyone know the brand? I've emailed, called but, you might think...