I am using the Max R shaft. I actually had it at 39.25 and went to the 2g weight but think I am going to take it to 39 so I can play with the weight a little more on it.
What would the recommended length be for the 5h? Also, what the anticipated swing weight is for that recommended length?
I know they have been gone for quite a while but was curious if any of the Maltby branded shafts would match up with the performance of them. Specifically, the 60g Stiff and 80g Regular shafts.
I second the laser etching of the Maltby circle M logo in the crown. Not sure what costs would be associated with it but think it would be more in line with the significant movement towards premium looks...
From a similar question. I would make sure that the hosel is nice and clean and that the bottom of it where the tip of the taper shaft fits isn't blocked. The Universal Hosel bore will accept both...
Hey, looks like we have our first pics. Maltby KE4 MAX Forged Iron Heads - The GolfWorks
The waiting is killing me too. I am looking at the TS3 and maybe the STI2 refresh but really waiting to see the KE4 Forged as I think it may be something to compete with my old Wishon 560s.
I started playing single length irons this year after playing the last 30+ years with traditional length. In my set the 4h-5h-6i-lw are all 7 iron length. I can certainly say that I have noticed a significant...
They have stated a few times there isn't enough call for single length to justify the cost associated. Given your specific scenario it could be done. If you want some info on how it could work, I would...
Looks like an early pic showed up on the site.
Below is the thread with a pic. Late March early April was the last I saw. https://ralphmaltby.com/questions/question/sti2-refresh/
I noticed this as well. I am pretty sure this is going to be the rate going forward. While it does suck $40 is still a decent price for assembly. FYI the new STi2 cosmetics are coming out soon and...
Any early pics of the KE4 forged and latest info on availability?
When will the new cosmetic STI2 be available? Want to get a set but holding out for the new cosmetics.
Will this still have the vibration dampening inserts (for the appropriate irons) similar to the current cosmetics?
It is pretty simple you can order some lead tape or tungsten weights. I recommend the tungsten (link below) as it looks better and well it isn't lead. I would start with 1 square on the back skirt of the...
Yes, you can use a steel shaft with the hybrid you would need to get the proper adapter to install the shaft into it. I believe that adapter uses a .370 shaft so you would want to ensure it was the correct...
I use a 6 inch chop saw. It clamps onto the shaft I set it up and pull it down never had a problem with accuracy of the cut. Golfworks sells one as does Harbor Freight. Well worth the investment. As...