Clubmaking Forum

I shared the link on GolfWRX, I'm sure you'll sell a lot of these

Thanks for the feedback Britt.

What's the ideal SW for both in your opinion? Is their any? I assume you recommend adding lead tape to get to the desired number is it's under?

Thanks Britt

Hey Britt, I bought a Maltby KE4 IST 5 wood pak (XS MPF shaft) a couple months ago from you guys, standard length is 42 inches. I swapped out the 8gm weight for a 14gm weight and have a standard Star...

I think you forgot 1 CB, which is the TE+

Thanks Britt, from what I gather, there will be nothing new coming in left-handed in regards to clubs in 2026, correct?

Britt, Any new driver offerings coming this year in left handed?

This is the answer Britt gave to the same question a couple weeks ago, see below. The differences are statistically insignificant.  MPF’s are only 1 point different.  We have always said that 50 to...

jts2025, I also live in Michigan (Clinton Township) and made the trip down to HQ for an iron fitting in the spring. The guys were great to work with and didn't feel like they rushed me. I would recommend...

More lefty options in 2026 Britt? A lot of us hitting from the wrong side are itching to buy some more products from Maltby.

Maltby does have a 14 way stand bag, but not a cart bag. I believe it's a Maxfli Honors bag with Maltby badging (link below). https://www.golfworks.com/maltby-14-way-stand-bag-magb002/p/magb002/

An alternative to that would be the new MPF Pro Series + shaft (they're awesome) and you can purchase a pak for only $89 already assembled. The X-stiff is 85gms, if you want something close to the MMT.

Page 201 of the GW catalog has all the info, specs, etc.

Ok, thanks Jim. Probably best I just hold off for now, until new info comes out

Hey Britt/Jim, Looking at possibly replacing my driver next season and seen in some of the comments on the golfworks site that you guys are working on a new driver for 2026. I know it’s early, but...

Thanks Jim, Any plans to produce any of the forged iron offerings in LH (TE/TS3/TS4)?

Hey Britt, I'm thinking of buying a 5 wood, so I can ditch my 3 wood and 3 hybrid. Based on the loft, I think this will be a good fit for the bag. My driver is a 12 degree and I also carry a 4 utility....

Thanks for the response. I had all of them bent a total of 2 degrees upright. We will see if that corrects it. If not, I will schedule an appointment with Kris and go from there.

Looks like the max bend is 2 degrees on these irons. They're already bent 1 degree upright, do you recommend not going more than 2 degrees total? Don't want them to bend them more than tolerance and have...