Sorry, I should have been more specific. Not available on the Canada website. I tried calling customer support and finally got thru. They confirmed RH is on backorder.
I am a right handed golfer. The Ping adapter PGC005 is only available as LH. If I leave the adapter setting on standard, can I use the LH? Thanks
Hi, Last year I installed an after market Tensei Blue AV Series (SFW) on my G425. Because I cut it 1 inch shorter than standard, I installed a tip weight to bring the swing weight to D4. Saturday I...
From my own experience of installing graphite shafts a few years ago, my clubs ended up 4 - 5 swing weights lighter as Britt describes above. I invested in a swing weight scale and added 10 gram lead...
Thanks Britt. The Canada site only has the Premium extensions so I'll try the 0.575 (silver).
Does anyone have the correct inside diameter for the KBS MAX 80 Steel shaft? I need to order a few extensions for a friend and don't have the club in front of me. I am guessing it requires a .575 extension...
Thanks. I double checked the hosel depth again with a drill bit slightly smaller than .355 and it measured 1". All 3 heads measured the same so it appears accurate. I did not apply the epoxy during...
Hi Just replaced a friends Mizuno JPX900 hot metal iron shafts with recoil .355 taper tip graphite shafts a few weeks ago. Used Golf Works Tour epoxy. Since then 3 shafts came off. What concerns me...
Thank You for all your feedback!
Thanks for your advice. When I install the head very little epoxy escapes from the top. Probably because the club head is a very snug fit to the point where I need to apply a reasonable amount of force...
Hi Guys I added a tip weight to my graphite iron shafts and after applying the epoxy, the head does not remain snug against the ferrule. I am guessing because the tip weight head seals the small hole...
Thank You. You advice is greatly appreciated.
If I install a Lead Graphite Shaft Tip Weight part GW01076 will this increase the shaft tip length by 1/4 inch and will this make the shaft tip play softer or is the change minimal? Do I need to trim...