Commented on a post

Britt, Appreciate your time/comments. I know I have high spin and that probably pulls back the yards however I can stop the ball on my number (sometimes on the green too!). Learning about clubs and building...

January 19, 2023 2
Commented on a post

please ignore the height apex, it is a SC300 issue when hitting into nets. when i put the other numbers into flightscope trajectory optimizer, heights are plus/minus 100 feet. Spin is on the high side,...

January 17, 2023 2
Asked a question
any suggestions on these 7 iron numbers?

Any recommendations for Maltby club head / shafts combo?  I play to a 9, and my predominate shot is left to right.  My miss is left.  I like to feel the shaft load and dislike shafts that don't have...

January 16, 2023 2
Asked a question
Potential KE4 MAX build, thought?

Britt, That time of the year when I start thinking about a building a new set of irons.  I am leaning towards the following:  KE4 Tour FDI H3/21 and H4/23 , and the KE4MAX 6/26 - Gap. I play to a 9,...

December 8, 2022 2
Asked a question
recommended wedge length , when your irons are - 1/2

Britt, If you play your irons -1/2 from GW's standard length, what is the recommendation for the wedges.  If the PW and GW would be 35 (-1/2 from 35.5) , how do you address the SW and LW?  -1/2 from...

September 21, 2021 2
Asked a question
Wood dowels in iron shafts

Could I get the opinions on this blueprint technique?  Also, where exactly do you set the dowel above the hosel in the shaft?

September 2, 2020 2