Any information of specific nature on how to pull broken shaft and/or ferrule replacement and is shaft .335 parallel?
T Brandt Answered question October 31, 2022
Any information of specific nature on how to pull broken shaft and/or ferrule replacement and is shaft .335 parallel?
I posted a technique to remove broken shafts from wood club heads that have doing for years.
It was posted on this forum under “Ruined sTw driver head” last 10/22/22. Hope this helps.
T Brandt
.335 shaft
since shaft is broken, hopefully above the hosel, it’s pretty straight forward. clamp shaft in vise. heat up the hosel with heat gun or torch (propane, I prefer butane). pull off club head with a gloved hand. not to much heat otherwise you’ll scorch the paint on the hosel. If it’s broken flush with the hosel, a bit more of a hassle.
If you haven’t done this before, go to a local shop and watch them.
Lots of utube video on utube if your nervous, but really easy peasy because your not reusing the shaft it’s broken. It’s a free hit to start, have fun…