Clubmaking Forum

I second the laser etching of the Maltby circle M logo in the crown.  Not sure what costs would be associated with it but think it would be more in line with the significant movement towards premium looks...

From a similar question. I would make sure that the hosel is nice and clean and that the bottom of it where the tip of the taper shaft fits isn't blocked. The Universal Hosel bore will accept both...

Hey, looks like we have our first pics. Maltby KE4 MAX Forged Iron Heads - The GolfWorks

The waiting is killing me too. I am looking at the TS3 and maybe the STI2 refresh but really waiting to see the KE4 Forged as I think it may be something to compete with my old Wishon 560s.

They have stated a few times there isn't enough call for single length to justify the cost associated. Given your specific scenario it could be done.  If you want some info on how it could work, I would...

Looks like an early pic showed up on the site.

I noticed this as well.  I am pretty sure this is going to be the rate going forward.  While it does suck $40 is still a decent price for assembly. FYI the new STi2 cosmetics are coming out soon and...

Yes, you can use a steel shaft with the hybrid you would need to get the proper adapter to install the shaft into it.  I believe that adapter uses a .370 shaft so you would want to ensure it was the correct...

I use a 6 inch chop saw. It clamps onto the shaft I set it up and pull it down never had a problem with accuracy of the cut.  Golfworks sells one as does Harbor Freight.  Well worth the investment. As...