Clubmaking Forum

We do not list the CG measurements on the wedges but they would also be pretty similar with the TSW, Max Milled and DRT wedges.  Wedges tend to have slightly higher CG's because of their increased loft. ...

I am told we are working on a new RH driver for 2026 and we may also add a LH version of the same driver.  The decision on the LH model has not been made for sure yet.  It is still very much in the model...

We do not have the UST Dart V shaft to be able to do our own shaft stiffness profile comparison to the Dart HDC.  On their website UST shows the Dart V made in a 90, 105 and 120 gram weight range.  In...

Ping has started using a universal type of hosel bore and we actually find the .370" tip size shafts fit better.  With .355" taper tips we actually use a shim to keep the shaft centered at the bottom...

The Srixon ZX5 iron use a .355" tip size iron shaft.  Neither the Recoil Dart 75 or Fujikura Pro 75 .370" tip size shafts will fit the Srixon ZX5 irons.  The same is true with the MPF Pro Series+ .370"...

When using the LH adapter in a RH club the standard setting and upright setting will be the same in both the RH and LH club.  The settings in between the standard and upright settings will read opposite...

We do not currently have any new LH fairway woods in the works for 2026.

Ping has been using a universal type of hosel bore with their newer irons and the MPF Pro Series shaft will work with this hosel bore.  It should work well with the S159 wedges.  I would recommend the...

We also have the new TS3.5 irons coming the end of September or first of October and the 5 iron in this set could be another option.  It will have a wider sole than the TS3 to help create a high launch. ...